Kia Cee'd: Maintenance
Kia Cee'd JD Owners Manual / Maintenance
- Engine compartment
- Maintenance services
- Owner maintenance
- Scheduled maintenance service
- NORMAL MAINTENANCE SCHEDULE - FOR EUROPE
- MAINTENANCE UNDER SEVERE USAGE CONDITIONS - FOR EUROPE
- NORMAL MAINTENANCE SCHEDULE - EXCEPT EUROPE
- MAINTENANCE UNDER SEVERE USAGE CONDITIONS - EXCEPT EUROPE
- Explanation of scheduled maintenance items
- Engine oil
- Engine coolant
- Brake/clutch fluid
- Washer fluid
- Parking brake - hand type
- Fuel filter (for Diesel)
- Air cleaner
- Climate control air filter
- Wiper blades
- Battery
- Tires and wheels
- Tire care
- Recommended cold tire inflation pressures
- Checking tire inflation pressure
- Tire rotation
- Wheel alignment and tire balance
- Tire replacement
- Wheel replacement
- Tire traction
- Tire maintenance
- Tire sidewall labeling
- Low aspect ratio tire
- Fuses
- Inner panel fuse replacement
- Fuse switch
- Engine compartment panel fuse replacement
- Main fuse
- Multi fuse
- Fuse/relay panel description
- Light bulbs
- Front light replacement
- Headlight and front fog light aiming
- Side repeater light bulb replacement
- Rear combination light bulb replacement
- High mounted stop light bulb replacement
- License plate light bulb replacement
- Interior light bulb replacement
- Appearance care
- Emission control system
Emergency commodity
There are some emergency commodities
in the vehicle to help you respond to the
emergency situation.
Fire extinguisher
If there is small fire and you know how to
use the fire extinguisher, take ...
Engine compartment
■ Gasoline engine (Gamma 1.6GDI)
■ Gasoline engine (Gamma 1.6MPI)
1. Engine oil filler cap
2. Brake/clutch fluid reservoir
3. Positive battery terminal
4. Negative battery terminal
5. Fu ...
Other information:
Kia Cee'd JD Service Manual: Heated Oxygen Sensor (HO2S) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the HO2S connector.
3.
Measure resistance between the HO2S terminals 2 and 5 [B1/S1].
4.
Measure resistance between ...
Kia Cee'd JD Service Manual: Input Speed Sensor 2 Repair procedures
Inspection
Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor.
Removal
1.
Turn off the ignition switch and then disconnect the battery (-) cable.
2.
Remove the under cover.
3.
...
© 2017-2022 www.kceed.com
