Kia Cee'd: Body Electrical System / Blind Spot Detection system

Kia Cee'd JD Service Manual / Body Electrical System / Blind Spot Detection system

Lane Departure Warning System (LDWS) Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the mirror wiring cover (A). 3. ...

Specifications
Specifications   Items Specification Rated voltage DC 12V Operating voltage 9V ~ 16V ...

Other information:

Kia Cee'd JD Service Manual: Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" ...

Kia Cee'd JD Owners Manual: Electronic Stability Control (ESC) indicator
The ESC indicator will illuminate when the ignition switch is turned ON, but should go off after approximately 3 seconds. When the ESC is on, it monitors the driving conditions. Under normal driving conditions, the ESC indicator will remain off. When a slippery or low traction condit ...

© 2017-2021 www.kceed.com