Kia Cee'd: Emission Control System
Kia Cee'd JD Service Manual / Emission Control System
- General Information
- Description and operation
- Specifications
- Troubleshooting
- Schematic diagrams
- Components and components location
- Crankcase Emission Control System
- Schematic diagrams
- Repair procedures
- Positive Crankcase Ventilation (PCV) Valve Description and operation
- Positive Crankcase Ventilation (PCV) Valve Repair procedures
- Evaporative Emission Control System
- Description and operation
- Schematic diagrams
- Repair procedures
- Canister Repair procedures
- Fuel Filler Cap Description and operation
- Exhaust Emission Control System
Cruise Control Switch Repair procedures
Removal
1.
Disconnect the battery (-) terminal.
2.
Remove the air-bag module from the steering wheel.
(Refer to Restraint - " ...
Other information:
Kia Cee'd JD Service Manual: Accelerator Position Sensor (APS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output voltage of the APS 1 and 2 at C.T and W.O.T.
Specificati ...
Kia Cee'd JD Service Manual: Side Impact Sensor (SIS) Description and operation
Description
The Side Impact Sensor (SIS) system consists of two front SIS which are installed
inside the Center Pillar (LH and RH). They are remote sensors that detect acceleration
due to collision at their mounting locations. The primary purpose of the Side
Impact Sensor (S ...
© 2017-2026 www.kceed.com
