Removal |
1. |
Disconnect the vapor hose (A).
|
2. |
Remove the PCV valve (B).
|
Inspection |
1. |
Insert a thin stick (A) into the PCV valve (B) from the threaded side
to check that the plunger movement.
|
Installation |
1. |
Installation is reverse of removal.
|
Kia Cee'd JD Service Manual: Repair procedures
General Inspection
After or before servicing the EPS system, perform the troubleshooting and test
procedure as follows. Compare the system condition with normal condition in
the table below and if abnormal symptom is detected, perform necessary remedy
and inspection.
&nb ...
Kia Cee'd JD Service Manual: Crankshaft Position Sensor (CKPS) Repair procedures
Inspection
1.
Check signal waveform of CKPS and CMPS using a GDS.
Specification: Refer to “Waveform”
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative ...