Kia Cee'd: Evaporative Emission Control System / Canister Repair procedures

Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the fuel tank assembly.
(Refer to Fuel System - "Fuel Tank")
3.
Disconnect the vapor hoses (A) and ventilation hose (B).
4.
Remove the canister (C) after removing the mouting bolts (D) and nut (E).

5.
Remove the canister protector after remove the bolt (A).

Inspection
1.
Check for the following items visually.
Cracks or leakage of the canister
Loose connection, distortion, or damage of the vapor hose/tube

A: Canister ↔ Atomosphere
B: Canister ↔ Fuel tank
C: Canister ↔ Intake manifold
Installation
1.
Installation is reverse of removal.
Canister protector installation bolt:
3.5 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
Repair procedures
Inspection [System Inspection] 1. Disconnect the vapor hose from the throttle body and connect a vacuum pump to the nipple on the throttle body. ...

Fuel Filler Cap Description and operation
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which seals the fuel filler. After the gasket on the fuel f ...

Other information:

Kia Cee'd JD Owners Manual: Good driving practices
Never take the vehicle out of gear and coast down a hill. This is extremely hazardous. Always leave the vehicle in gear. Don't "ride" the brakes. This can cause them to overheat and malfunction. Instead, when you are driving down a long hill, slow down and shift to a lower ...

Kia Cee'd JD Service Manual: Water Jacket Insert Repair procedures
Remove and Installation 1. Remove the cylinder head assembly. (Refet to Cylinder Head Assembly - "Cylinder Head") 2. Remove the water jacket Insert (A).    ...

© 2017-2023 www.kceed.com