Kia Cee'd: Engine Mechanical System / Intake And Exhaust System
Kia Cee'd JD Service Manual / Engine Mechanical System / Intake And Exhaust System
- Air Cleaner Components and components location
- Air Cleaner Repair procedures
- Variable Intake Solenoid(VIS) Actuator Repair procedures
- Intake Manifold Components and components location
- Intake Manifold Repair procedures
- Exhaust Manifold Components and components location
- Exhaust Manifold Repair procedures
- Muffler Components and components location
- Muffler Repair procedures
Oil Level Gauge & Pipe Repair procedures
Removal and Installation
1.
Remove the oil lever gauge(A).
Tightening torque:
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)
...
Air Cleaner Components and components location
Components
1. Air intake hose
2. Air cleaner cover
3. Air cleaner filter
4. Air cleaner body
5. Resonator
6. Air duct
...
Other information:
Kia Cee'd JD Owners Manual: Washer fluid
Checking the washer fluid level
Check the fluid level in the washer fluid
reservoir and add fluid if necessary.
Plain water may be used if washer fluid is
not available. However, use washer solvent
with antifreeze characteristics in
cold climates to prevent freezing.
WARNING - Coolant
...
Kia Cee'd JD Service Manual: Temperature Control Actuator Description and operation
Description
The heater unit includes mode control actuator and temperature control actuator.
The temperature control actuator is located at the heater unit. It regulates
the temperature by the procedure as follows. Signal from the control unit adjusts
the position of the ...
© 2017-2026 www.kceed.com
