Kia Cee'd: Lubrication System / Oil Level Gauge & Pipe Repair procedures

Kia Cee'd JD Service Manual / Engine Mechanical System / Lubrication System / Oil Level Gauge & Pipe Repair procedures

Removal and Installation
1.
Remove the oil lever gauge(A).
Tightening torque:
9.8 ~ 11.8N.m (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft)

2.
Install in the reverse order of removal.
Oil Pan Repair procedures
Removal 1. Remove the under covers. 2. Drain engine oil. 3. Using the SST(09215-3C000) and remove the oil ...

Intake And Exhaust System
...

Other information:

Kia Cee'd JD Owners Manual: To cancel cruise control, do one of the following
Depress the brake pedal. Depress the clutch pedal if equipped with a manual transaxle. Shift into N (Neutral) if equipped with an automatic transaxle. Press the O (Cancel) button located on the steering wheel. Decrease the vehicle speed lower than the memory speed by 20 km/h ...

Kia Cee'd JD Service Manual: Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Remove the ECTS (Refer to "Removal"). 3. After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS ...

© 2017-2026 www.kceed.com