Kia Cee'd: Body Electrical System / Button Engine Start System

Rear Parking Assist System Switch Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the console upper tray complete. (Refer to Body - "Floo ...

Components and components location

Component Location   1. Start Stop Button (SSB) 2. FOB key 3. Smart key unit 4. Interior antenna 1 5. Interior antenna 2 6. Trunk antenna ...

Other information:

Kia Cee'd Service Manual: Steering Angle Sensor Description and operation
Description The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine turning direction and speed of the steering wheel. The HECU uses the signals from th ...

Kia Cee'd Service Manual: ISG (Idle Stop & Go) Description and operation
Description Idle Stop & Go (ISG) system switches off the ignition when vehicle is stopped, and then restarts the ignition and starts the vehicle when accelerator is pushed. It temporarily stops the engine while waiting for signal or idling to improve fuel efficiency and ...