Kia Cee'd: Button Engine Start System / Start/Stop Button Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad center fascia panel.
(Refer to Body - "Center Fascia Panel")
3.
Disconnect the start/stop button connector (A).

4.
Remove the start/stop button (A) after loosening the screws.

Installation
1.
Install the start/stop button.
2.
Connect the start/stop button connector.
3.
Install the crash pad center garnish.
Start/Stop Button Components and components location
Component ...

ESCL(Electronic Steering Column Lock) Components and components location
Component ...

Other information:

Kia Cee'd JD Service Manual: Front Driveshaft Repair procedures
Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub . Tightening torque: 88.2 ...

Kia Cee'd JD Service Manual: Multimedia Jack Schematic diagrams
Circuit Diagram   No Terminal Description Condition Specified Condition 1 USB /iPod power USB/iPod device is inserted 4.9V ~ 5.1V 2 USB D- ...

© 2017-2025 www.kceed.com