Kia Cee'd: Body (Interior and Exterior) / Hood
- Repair procedures
- Hood Assembly Components and components location
- Hood Assembly Repair procedures
- Hood Weatherstrip Repair procedures
- Hood Latch Release Handle Components and components location
- Hood Latch Release Handle Repair procedures
- Hood Latch Components and components location
- Hood Latch Repair procedures
Repair procedures
Replacement
•
Be careful not to damage the fender and body.
...
Repair procedures
Adjustment
1.
After loosening the hinge (A) mounting bolt, adjust the hood (B) by
moving it up or down, or right or left.
2.
Adjust ...
Other information:
Kia Cee'd JD Service Manual: ISG (Idle Stop & Go) Description and operation
Description
Idle Stop & Go (ISG) system switches off the ignition when vehicle is stopped,
and then restarts the ignition and starts the vehicle when accelerator is pushed.
It temporarily stops the engine while waiting for signal or idling to improve
fuel efficiency and ...
Kia Cee'd JD Service Manual: Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the steering column upper and low ...
© 2017-2025 www.kceed.com
