Kia Cee'd: Hood / Hood Latch Release Handle Components and components location

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle Components and components location

Component Location

 
1. Hood latch release handle


Hood Weatherstrip Repair procedures
Replacement 1. Remove the hood weatherstrip (A). 2. Install in the reverse order of removal. ...

Hood Latch Release Handle Repair procedures
Replacement 1. Using a screwdriver or remover, remove the hood latch release handle (A). 2. Install in the reverse order of ...

Other information:

Kia Cee'd JD Service Manual: ETC (Electronic Throttle Control) System Repair procedures
Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T. Specification: Refe ...

Kia Cee'd JD Service Manual: Shift Lever Repair procedures
Removal 1. Disconnect the battery negative (-) cable. 2. Remove the gear boots (A) and then remove the shift lever knob (B) by rotating counter-clockwise. 3. Remove the floor console assembly. ...

© 2017-2025 www.kceed.com