Kia Cee'd: Hood / Hood Assembly Components and components location

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Hood / Hood Assembly Components and components location

Component Location

 
1. Hood assembly

Repair procedures
Adjustment 1. After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left. 2. Adjust ...

Hood Assembly Repair procedures
Replacement    • Be careful not to damage the hood and body. ...

Other information:

Kia Cee'd JD Service Manual: Blower Unit Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater & blower assembly. (Refer to Heater - "Heater Unit") 3. Separate the blower unit from the heater un ...

Kia Cee'd JD Service Manual: Steering Angle Sensor Description and operation
Description The Steering Angle Sensor (SAS) is installed in MDPS (Motor Driven Power Steering) and it sends messages to HECU through CAN communication line. The SAS is used to determine turning direction and speed of the steering wheel. The HECU uses the signals from th ...

© 2017-2025 www.kceed.com