Kia Cee'd: Driveshaft and axle / Driveshaft Assembly
- Front Driveshaft Components and components location
- Front Driveshaft Repair procedures
- TJ Joint Components and components location
- TJ Joint Repair procedures
- Dynamic Damper Components and components location
- Dynamic Damper Repair procedures
- BJ Boot Components and components location
- BJ Boot Repair procedures
Repair procedures
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front ...
Front Driveshaft Components and components location
Component
1. Driveshaft (LH)
2. Circlip
3. Driveshaft (RH)
...
Other information:
: Cooling System Capacity and Specification - 2.5L, Hybrid Electric Vehicle (HEV)/Plug-In
Hybrid Electric Vehicle (PHEV)
Use coolant that meets the defined
specification.
If you do not use coolant that meets the
defined specification, it could result in:
Component damage that your vehicle
warranty does not cover.
Reduced vehicle performance.
Capacities
Materials
...
Kia Cee'd JD Service Manual: Ambient Temperature Sensor Description and operation
Description
The ambient temperature sensor is located at the front of the condenser and
detects ambient air temperature. It is a negative type thermistor; resistance
will increase with lower temperature, and decrease with higher temperature.
The sensor output will be used ...
