Kia Cee'd: Engine Electrical System / Charging System
- Description and operation
- Repair procedures
- Alternator Description and operation
- Alternator Specifications
- Alternator Components and components location
- Alternator Schematic diagrams
- Alternator Repair procedures
- DC DC Converter Description and operation
- DC DC Converter Components and components location
- DC DC Converter Schematic diagrams
- DC DC Converter Repair procedures
- Battery Description and operation
- Battery Components and components location
- Battery Repair procedures
- Battery Troubleshooting
- Battery Sensor Description and operation
- Battery Sensor Repair procedures
Spark Plug Repair procedures
Inspection
[On vehicle inspection]
1.
Accelerate the engine to about 3,000 rpm 3 times or more.
2.
Remove the spark plug.
...
Description and operation
Description
The charging system included a battery, an alternator with a built-in regulator,
and the charging indicator light and wire.
The Alternator has eight built-in diodes ...
Other information:
: Second Stage: Checking the tire pressure with the inflator kit
WARNING: If the tire does not
inflate to the recommended tire pressure
within 15 minutes, stop and call roadside
assistance.
WARNING: The power plug may
get hot after use and should be handled
carefully when unplugging.
Check the air pressure of your tires as
follows:
Remove the valve cap f ...
Kia Cee'd JD Service Manual: Rail Pressure Sensor (RPS) Description and operation
Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the
instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor
element) built in the sensor converts the pressure to voltage signal. By using
this signal, the ECM ...
