Kia Cee'd: Brake System / ABS(Anti-Lock Brake System)
- Components and components location
- Description and operation
- Schematic diagrams
- Troubleshooting
- EBD(Electronic Brake-force Distribution) Description and operation
- ABS Control Module Components and components location
- ABS Control Module Repair procedures
- Front Wheel Speed Sensor Components and components location
- Front Wheel Speed Sensor Repair procedures
- Rear Wheel Speed Sensor Components and components location
- Rear Wheel Speed Sensor Repair procedures
EPB Switch Repair procedures
Remove
1.
Turn ignition OFF and disconnect the negative (-) battery cable.
2.
Remove the floor console upper cover.
(Refer t ...
Components and components location
Components
1. ABS Control Module(HECU)
2. Front Wheel Speed Sensor
3. Rear Wheel Speed Sensor
4. ABS Warning lamp
5. EBD / Parking brake warnin ...
Other information:
Kia Cee'd JD Service Manual: Overhead Console Lamp Repair procedures
Inspection
1.
Remove the overhead console lamp assembly then check for continuity
between terminals. If the continuity is not as specified, replace the
map lamp switch.
[Non-Sunroof Type]
No.
...
: Programming a MyKey. Clearing All MyKeys. Checking MyKey System Status.
Using MyKey With Remote Start Systems
Programming a MyKey
You can program any remote control to
become a restricted MyKey, but you must
leave one unmodified as an admin key.
Switch the ignition on using an admin
key.
Press Settings on the touchscreen.
Press Vehicle Settings.
Press MyKey.
Select a setting and press the OK
but ...
