Remove |
1. |
Turn ignition OFF and disconnect the negative (-) battery cable.
|
2. |
Remove the floor console upper cover.
(Refer to Body - "Floor console assembly")
|
3. |
Remove the EPB switch assembly after loosening the screws.
|
4. |
Install in the reverse order of removal.
|
Kia Cee'd JD Service Manual: ISG (Idle Stop & Go) Schematic diagrams
Schematic Diagram
1. C-CAN
High/Low
2. MIL. Lamp
3. Immobilizer
4. Canister
5. Manifold Absolute Pressure Sensor (MAPS)
6. Intake Air Temperature Sensor (IATS)
7. Engine Coolant Temperature Sensor (ECTS)
8. Throttle Position Sensor (T ...
Kia Cee'd JD Service Manual: Tail Gate Weatherstrip Repair procedures
Replacement
1.
Remove the tail gate weatherstrip (A).
•
Do not apply sealant to the body.
...