Kia Cee'd: ABS(Anti-Lock Brake System) / Front Wheel Speed Sensor Repair procedures

Kia Cee'd JD Service Manual / Brake System / ABS(Anti-Lock Brake System) / Front Wheel Speed Sensor Repair procedures

Removal
1.
Remove the front wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the front wheel speed sensor mounting bolt (A).
Tightening torque:
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

3.
Remove the front wheel guard .
4.
Disconnect the front wheel speed sensor connector (A), and then remove the front wheel speed sensor.

5.
Install in the reverse order of removal.
Front Wheel Speed Sensor Components and components location
Components   1. Front wheel speed sensor 2. Front wheel speed sensor connector ...

Rear Wheel Speed Sensor Components and components location
Components   1. Rear wheel speed sensor 2. Rear wheel speed sensor connector ...

Other information:

Kia Cee'd JD Service Manual: PTC Heater (Gasoline Engine) Description and operation
Descriptionddd The PTC (Positive Temperature Coefficient) heater is installed at the exit or the backside of the heater core. The PTC heater is an electric heater using a PTC element as an auxiliary heating device that supplements deficiency of interior heat source in high ...

Kia Cee'd JD Service Manual: Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification: Refer to "Specification" ...

© 2017-2026 www.kceed.com