Kia Cee'd: Engine Electrical System / Starting System

Battery Sensor Repair procedures

Removal 1. Disconnect the battery negative (-) cable. 2. Disconnect the battery sensor connector (A). 3. ...

Description and operation

Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connecti ...

Other information:

Kia Cee'd JD Service Manual: Rail Pressure Sensor (RPS) Description and operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal. By using this signal, the ECM ...

Kia Cee'd JD Owners Manual: Aiming point
H1 : Height between the head lamp bulb center and ground (Low beam) H2 : Height between the head lamp bulb center and ground (High beam) H3 : Height between the fog lamp bulb center and ground W1 : Distance between the two head lamp bulbs centers (Low beam) W2 : Distance between the two head l ...