Kia Cee'd: Body Side Molding / Rear Mud Guard Repair procedures

Replacement
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
  
Take care not to scratch the body surface.
1.
After loosening the mounting clip and screws, then remove the rear mud guard (A).

2.
Install in the reverse order of removal.
  
Replace any damaged clips.
Front Mud Guard Repair procedures
Replacement    • When prying with a flat-tip screwdriver, wrap it with protective ...

Panoramaroof
...

Other information:

Kia Cee'd JD Service Manual: Cooling Fan Repair procedures
Removal and Installation 1. Disconnect the battery negative terminal. 2. Remove the air cleaner assembly. (Refer to Intake and exhaust system - "Air Cleaner") 3. Remove the battery tray. ...

Kia Cee'd JD Service Manual: Side Impact Sensor (SIS) Description and operation
Description The Side Impact Sensor (SIS) system consists of two front SIS which are installed inside the Center Pillar (LH and RH). They are remote sensors that detect acceleration due to collision at their mounting locations. The primary purpose of the Side Impact Sensor (S ...

© 2017-2020 www.kceed.com