
The EPB malfunction indicator will illuminate when the ignition switch is turned ON, but should go off after approximately 3 seconds. If the warning light does not come on, or continuously remains on we recommend that the system be checked by an authorized Kia dealer.
Also, the EPB malfunction indicator may illuminate when the ESC indicator comes on to indicate that the ESC is not working properly, but if this occurs, it does not indicate the EPB has malfunctioned.
For more details, refer to "EPB" in chapter 5.
Parking brake & brake
fluid warning
Anti-lock brake system
(ABS) warning lightKia Cee'd JD Service Manual: IMS (Integrated Memory System) module Repair procedures
Removal
1.
Remove the negative (-) battery terminal.
2.
Remove the driver seat in the car.
(Refer to Body - "Front Seat Assembly")
3.
Remove the IMS module (A) after loosening 3 screws i ...
Kia Cee'd JD Service Manual: Rain Sensor Repair procedures
Inspection
Rain Sensing Wiper
1.
In IGN2 ON state, if auto switch input (LIN communication) is ON then
both wiper low relay and wiper high relay outputs are controlled by
the rain sensor input signal.
2.
If the wiper switc ...