Kia Cee'd: Engine Mechanical System / Cooling System
Kia Cee'd JD Service Manual / Engine Mechanical System / Cooling System
- Troubleshooting
- Coolant Repair procedures
- Radiator Components and components location
- Radiator Repair procedures
- Cooling Fan Components and components location
- Cooling Fan Repair procedures
- Water Temperature Control Assembly Components and components location
- Water Temperature Control Assembly Repair procedures
- Water pump Components and components location
- Water pump Repair procedures
- Water pump Troubleshooting
- Thermostat Components and components location
- Thermostat Repair procedures
- Thermostat Troubleshooting
Cylinder Block Repair procedures
Removal
Engine removal is required for this procedure.
(Refer to Engine and transaxle assembly removal in this group)
1.
MT : Remove the flywheel.
( ...
Troubleshooting
Engine Overheat Troubleshooting
Inspection
Remedy
Visual inspection
Inspect for shortage of coolant in reservoir tank .
...
Other information:
Kia Cee'd JD Service Manual: Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least thirty
seconds before beginning work.
2.
Remove the lower anchor bolt.
3.
Remove the center pillar trim.
(Refer to Body - &q ...
Kia Cee'd JD Service Manual: Description and operation
Description
BSD is a system that uses two magnetic wave radar sensors attached on the rear
panel to measure the distance from the following vehicles and provides the sensing
and (visual and auditory) alarm of any vehicle coming into the blind spot.
–
...
© 2017-2020 www.kceed.com