Kia Cee'd: Rear Bumper / Rear Bumper beam Assembly Components and components location

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Rear Bumper / Rear Bumper beam Assembly Components and components location

Component Location

 
1. Rear bumper beam assembly


Rear Bumper Cover Repair procedures
Replacement    • Put on gloves to protect your hands. ...

Rear Bumper beam Assembly Repair procedures
Replacement    • Put on gloves to protect your hands. ...

Other information:

Kia Cee'd JD Service Manual: Auto Defogging Sensor Description and operation
Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal if moisture occurs to blow out wind for defogging. The air conditioner control module receives signal from the sensor and restrains moisture and eliminate defog b ...

Kia Cee'd JD Service Manual: Smart Parking Assist System Sensor Repair procedures
Removal Front/Rear SPAS Sensor 1. Remove the front bumper. (Refer to Body - "Front Bumper Cover") 2. Pull out the SPAS sensor (A) by opening the sensor holder out. 3. Disconn ...

© 2017-2025 www.kceed.com