Kia Cee'd: Features of your vehicle / Lighting
- Battery saver function
- Headlamp delay function
- Headlight (Headlamp) welcome function
- Static bending light
- Lighting control
- High Beam Assist (HBA)
- Operating condition
- Turn signals and lane change signals
- Front fog light
- Rear fog light
- Daytime running light
- Headlight leveling device
- Adaptive Front Lighting System (AFLS)
Hazard warning flasher
The hazard warning flasher should be
used whenever you find it necessary to
stop the vehicle in a hazardous location.
When you must make such an emergency
stop, always pull off the road as f ...
Battery saver function
The purpose of this feature is to prevent
the battery from being discharged.
The system automatically
turns off the parking lights when the
driver removes the ignition key (Smart
key ...
Other information:
: Switching All of the Interior Lamps On and Off. Switching the Front Interior
Lamps On and Off. Switching the Rear Interior Lamps On and Off
Switching All of the Interior Lamps On and Off
The lamps turn on under the following
conditions:
You open any door.
You press a button on the remote
control.
You press the all lamps on button on
the overhead console.
Press to switch all interior
lamps
on or off.
Switching the Front Inte ...
Kia Cee'd JD Service Manual: Cylinder Block Repair procedures
Removal
Engine removal is required for this procedure.
(Refer to Engine and transaxle assembly removal in this group)
1.
MT : Remove the flywheel.
(Refet to Cylinder Block - "Flywheel")
2.
AT : Remove the dr ...
