Kia Cee'd: Instrument cluster (Super vision) / Gauges

Instrument panel illumination

The instrument panel illumination intensity can be adjusted as follows: Ignition switch in the ON position Pressing the upper or lower part of the switch The illumination intensity is ...

Tachometer

The tachometer indicates the engine speed in revolutions per minute (rpm). Use the tachometer to select the correct shift points and to prevent lugging and/or over-revving the engine. CAUTIO ...

Other information:

Kia Cee'd JD Owners Manual: Auto stop
To stop the engine in idle stop mode 1. Decrease the vehicle speed to less than 5 km/h (3 mph). 2. Shift into N (Neutral) position. 3. Release the clutch pedal. The engine will stop and the green AUTO STOP() indicator on the instrument cluster will illuminate. Also, a message "Auto St ...

Kia Cee'd JD Service Manual: Intake Air Temperature Sensor (IATS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within ...