Kia Cee'd: Engine Control System / Fuel Pressure Control Valve Specifications

Kia Cee'd JD Service Manual / Fuel System / Engine Control System / Fuel Pressure Control Valve Specifications

Specification
 
Item
Specification
Coil Resistance (Ω)
0.5 [20°C(68°F) 

Fuel Pressure Control Valve Description and operation
Description Fuel Pressure Regulator Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculat ...

Fuel Pressure Control Valve Troubleshooting
Signal Waveform ...

Other information:

: Ignition Switch
Switching the Ignition Off Turn the key to position 0. Switching the Ignition to Accessory Mode Turn the key to position I. Electrical accessories, for example the radio, operate without the engine running. Switching the Ignition On Turn the key to position II. All electrical circuits and access ...

Kia Cee'd JD Service Manual: PAB ON/OFF Switch Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Remove the crash pad side cover. (Refer ...

© 2017-2026 www.kceed.com