Kia Cee'd: Engine Control System / Fuel Pressure Control Valve Description and operation

Fuel Pressure Regulator Valve is installed on the high pressure fuel pump and controls fuel flow flowing into the injectors in accordance with the ECM signal calculated based on various engine condition.

Variable Intake Solenoid (VIS) Valve Repair procedures

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance ...

Fuel Pressure Control Valve Specifications

Specification   Item Specification Coil Resistance (Ω) 0.5 [20°C(68°F)  ...

Other information:

: Exterior Lamps
Switching the Turn Signal Lamps On and Off Push the lever up or down to switch the turn signal lamps on. Set the lever to the middle position to switch the turn signal lamps off. Note: Tap the lever up or down to make the turn signal lamps flash three times. Switching the Daytime Running Lamps ...

Kia Cee'd JD Owners Manual: Electronic Stability Control (ESC) indicator
The ESC indicator will illuminate when the ignition switch is turned ON, but should go off after approximately 3 seconds. When the ESC is on, it monitors the driving conditions. Under normal driving conditions, the ESC indicator will remain off. When a slippery or low traction condit ...