Kia Cee'd: Back View Camera System / Description and operation

Description
To provide the driver the rear of the vehicle, the backview camera receives the vehicle rearview image signal and displays the image on the AV head unit monitor or on the right side of the inside rearview mirror.
The backview camera is a supplementary device that show the blind spot of the rear of the vehicle.
Schematic diagrams
Circuit Diagram ...

Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Open the tailgate and remove the tailgate trim. (Refer to Body - &q ...

Other information:

Kia Cee'd JD Service Manual: Compressor Repair procedures
Removal 1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. 2. Disconnect the negative cable from the battery. ...

Kia Cee'd JD Service Manual: Rail Pressure Sensor (RPS) Description and operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal. By using this signal, the ECM ...

© 2017-2026 www.kceed.com