Kia Cee'd: Dual Clutch Transmission Control System / Input Speed Sensor 2 Specifications

Specification
Input Speed Sensor 2
▷ Type: Hall effect sensor
▷ Specifications
 
Item
Specifications
Output voltage (V)
Low
0.7
High
1.4

Input Speed Sensor 2 Description and operation
Description The input shaft speed sensor is important in that it detects the input shaft RPM and sends this information to the Transmission Control Module (TCM). It provides i ...

Input Speed Sensor 2 Schematic diagrams
Schematic Diagrams ...

Other information:

Ford Escape 2020-2026 Owners Manual: Installing a Child Restraint in a Center Seat. Combining the Seatbelt and Lower Anchors for Attaching Child Restraints
Installing a Child Restraint in a Center Seat WARNING: The standardized spacing for LATCH lower anchors is 11 in (280 mm) center to center. Do not use LATCH lower anchors for the center seating position unless the child restraint manufacturer's instructions permit and specify using anchors spa ...

Kia Cee'd JD Service Manual: Blind Spot Detection Unit" Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper cover. (Refer to Body - "Rear Bumper Cover") 3. Remove the BSD unit (A) after loosening the mounting nu ...

© 2017-2026 www.kceed.com