Kia Cee'd: Dual Clutch Transmission Control System / Input Speed Sensor 2 Schematic diagrams

Schematic Diagrams

Input Speed Sensor 2 Specifications
Specification Input Speed Sensor 2 ▷ Type: Hall effect sensor ▷ Specifications   Item Specifications Output voltage (V) ...

Input Speed Sensor 2 Repair procedures
Inspection Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor. Removal 1. Turn off the ignition switch and then disconnect the batte ...

Other information:

Kia Cee'd JD Service Manual: Temperature Control Actuator Description and operation
Description The heater unit includes mode control actuator and temperature control actuator. The temperature control actuator is located at the heater unit. It regulates the temperature by the procedure as follows. Signal from the control unit adjusts the position of the ...

Kia Cee'd JD Service Manual: Blower Unit Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the heater & blower assembly. (Refer to Heater - "Heater Unit") 3. Separate the blower unit from the heater un ...

© 2017-2026 www.kceed.com