Kia Cee'd: Warnings and indicators (Instrument cluster) / High beam indicator
This indicator illuminates when the headlights are on and in the high beam position or when the turn signal lever is pulled into the Flash-to-Pass position.
Low Beam Indicator Light
This indicator light illuminates when the
headlights are on. ...
High beam assist indicator
This warning light illuminates :
When the high-Beam is on with the light
switch in the AUTO light position.
If your vehicle detects oncoming or
preceding vehicles, the high beam
assis ...
Other information:
Kia Cee'd JD Service Manual: Rail Pressure Sensor (RPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine speed.
Condition
Output Voltage (V)
...
Kia Cee'd JD Service Manual: In car sensor (DATC only) Description and operation
Description
The In-car air temperature sensor is built in the heater & A/C control unit.
The sensor contains a thermistor which measures the temperature of the inside.
The signal decided by the resistance value which changes in accordance with
perceived inside tempera ...
