Kia Cee'd: Warnings and indicators (Instrument cluster) / High beam assist indicator
This warning light illuminates :
- When the high-Beam is on with the light switch in the AUTO light position.
- If your vehicle detects oncoming or preceding vehicles, the high beam assist system will switch the high beam to low beam automatically.
❈For more details, refer to “High beam assist” in chapter 4.
High beam indicator
This indicator illuminates when the headlights
are on and in the high beam position
or when the turn signal lever is pulled
into the Flash-to-Pass position. ...
Adaptive Front
Lighting System (AFLS)
malfunction indicator
If the AFLS malfunction indicator illuminates,
the AFLS is not working properly.
Drive to the nearest safe location and
restart the engine. If the indicator continuously
remains on, we recom ...
Other information:
Kia Cee'd JD Service Manual: Front Driveshaft Repair procedures
Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.2 ...
Kia Cee'd JD Service Manual: Auto Defogging Sensor Description and operation
Description
The auto defogging sensor is installed on the front window glass. The sensor
judges and sends signal if moisture occurs to blow out wind for defogging. The
air conditioner control module receives signal from the sensor and restrains
moisture and eliminate defog b ...
