| Removal |
| 1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
|
| 2. |
Disconnect the electric pump & sender wiring connector (A).
|
| 3. |
Remove the fuel feed tube (A) from the fuel filter after releasing the
fixing clip (B).
|
| 4. |
Remove the plate assembly (C) after removing the cushion pipe fixing
hooks (D).
|
| 5. |
Disconnect the electric pump wiring connector (A) from the pump.
|
| 6. |
Remove the reservior cup (B) after releasing the fixing hooks (C).
|
| 7. |
Remove the fuel sender (A) with sliding it downward after releasing
the latch (B).
|
| 8. |
Remove the fuel pressure regulator assembly (A) after releasing the
cap (B) and return pipe (C).
|
| 9. |
Extract the fuel filter (A) upward after releasing the fixing hooks
(B).
|
| Installation |
| 1. |
Installation is reserve of removal.
|
Fuel Pump Repair procedures
Fuel Pump Motor Repair proceduresKia Cee'd JD Owners Manual: Puddle lamp
When all doors are locked and closed,
the puddle lamp will come on for 15 seconds
if any of the below is performed.
Without smart key system
- When the door unlock button is
pressed on the transmitter.
With the smart key system
- When the door unlock button is
pressed on the smar ...
Kia Cee'd JD Service Manual: Rear Door Latch Repair procedures
Replacement
1.
Remove the rear door module.
(Refer to Rear Door - "Rear Door Module")
2.
Remove the rear door outside handle base (A) by pushing in the lock
pins located in the back.
3. ...