| Removal |
| 1. |
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
|
| 2. |
Disconnect the electric pump & sender wiring connector (A).
|
| 3. |
Remove the fuel feed tube (A) from the fuel filter after releasing the
fixing clip (B).
|
| 4. |
Remove the plate assembly (C) after removing the cushion pipe fixing
hooks (D).
|
| 5. |
Disconnect the electric pump wiring connector (A) from the pump.
|
| 6. |
Remove the reservior cup (B) after releasing the fixing hooks (C).
|
| 7. |
Remove the fuel sender (A) with sliding it downward after releasing
the latch (B).
|
| 8. |
Extract the fuel filter (A) upward after releasing the fixing hooks
(B).
|
| Installation |
| 1. |
Installation is reserve of removal.
|
Fuel Filter Repair procedures
Fuel Sender Assembly Repair proceduresKia Cee'd JD Owners Manual: Fuel filter warning light
(Diesel engine)
This warning light illuminates for 3 seconds
after the ignition switch is set to the
ON position and then it will go out. If it
lights up while the engine is running, it
indicates that water has accumulated
inside the fuel filter. If this happens,
remove the water from the fuel filter. ...
Kia Cee'd JD Service Manual: Auto Light Sensor Repair procedures
Inspection
In the state of IGN1 ON, when multifunction switch module detects auto light
switch on, tail lamp relay output and head lamp low relay output are controlled
according to auto light sensor's input.
The auto light control doesn't work if the pin sunlight s ...