Kia Cee'd: Brake System / ESP(Electronic Stability Program) System
Kia Cee'd Service Manual / Brake System / ESP(Electronic Stability Program) System
- Components and components location
- Description and operation
- Schematic diagrams
- Troubleshooting
- ESP Control Module Components and components location
- ESP Control Module Repair procedures
- Yaw-rate and Lateral G Sensor Description and operation
- Yaw-rate and Lateral G Sensor Repair procedures
- ESP OFF Switch Description and operation
- ESP OFF Switch Repair procedures
- Steering Angle Sensor Description and operation
- Emergency Signal System Description and operation
Rear Wheel Speed Sensor Repair procedures
Removal
1.
Remove the rear wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
...
Components and components location
Components
1. ESP Control Module (HECU)
2. Front Wheel Speed Sensor
3. Rear Wheel Speed Sensor
4. Steering Wheel Angle Sensor
5. Yaw-late & Lat ...
Other information:
Kia Cee'd Service Manual: ESP OFF Switch Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad center lower panel.
(Refer to Crash Pad - "Crash Pad Center Panel")
3.
Remove the center facia switch ass ...
Kia Cee'd Service Manual: Input Speed Sensor 1 Repair procedures
Inspection
Refer to DTC code "P2765, P2766" Input Shaft Speed Sensor.
Removal
1.
Turn off the ignition switch and then disconnect the battery (-) cable.
2.
Remove the under cover.
3.
...
© 2017-2019 www.kceed.com