Kia Cee'd: Starting System / Starter Specifications

Kia Cee'd JD Service Manual / Engine Electrical System / Starting System / Starter Specifications

Specification

Starter [Non-ISG type]

Item		Specification
Rated voltage		12 V, 1.2 kW
The number of pinion teeth		10
Performance [No-load, 11 V]	Ampere	Max. 95 A
	Speed	Min. 2500 rpm

Starter [ISG type]

Item		Specification
Rated voltage		12 V, 1.3 kW
The number of pinion teeth		11
Performance [No-load, 12 V]	Ampere	Max. 95 A
	Speed	Min. 3400 rpm

Starter Description and operation

Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connecti ...

Starter Components and components location

Components 1. Screw 2. Front housing 3. Stop ring 4. Stopper 5. Overunn clutch 6. Lever 7. Lever plate 8. Lever packing 9. Magnet s ...

Other information:

: Charging Your Vehicle Precautions
WARNING: In Canada, do not use the 120 volt convenience cord in commercial garages. WARNING: This equipment has arcing or sparking parts. Do not expose to flammable vapors. Position this equipment at least 18 in (450 mm) above the floor. WARNING: The AC wall plug must fit firmly into the AC o ...

Kia Cee'd JD Service Manual: Dynamic Damper Repair procedures
Replacement 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refer to Driveshaft Assembly - “TJ Joint”) 3. Rem ...