Kia Cee'd: Multifunction Switch / Specifications
| Specifications |
|
Items |
Specifications |
|
|
Rated voltage |
DC 12V |
|
|
Operating temperature range |
-22 ~ +176°F (-30°C ~ +80°C) |
|
|
Rated load |
Dimmer & passing switch |
High : 0.2A (Relay load) Low : 0.2A (Relay load) Passing : 0.2A (Relay load) |
|
Lighting & auto lighting switch |
Lighting : 0.2A (Relay load) |
|
|
Turn signal switch |
6.6A (Lamp load) |
|
|
Front & rear fog lamp switch |
0.2A (Relay load) |
|
|
Wiper & mist switch |
Low, High : 4.5A (Motor load) Intermittent : 0.22 ± 0.05A (Relay load) Lock : Max. 28A (Motor load) Mist : 4.0A (Motor load) Washer : 4.0A (Motor load) |
|
|
Rear wiper & washer |
Wiper : 1A (Relay load) Washer : 4.0A (Motor load) |
|
Components and components location
Components (1)
1. Steering column
2. Lighting switch
3. Wiper switch
4. Screw
5. Clock spring
Components (2)
...
Other information:
Kia Cee'd JD Service Manual: Compressor Repair procedures
Removal
1.
If the compressor is marginally operable, run the engine at idle speed,
and let the air conditioning work for a few minutes, then shut the engine
off.
2.
Disconnect the negative cable from the battery.
...
Kia Cee'd JD Service Manual: Idler Repair procedures
Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Dreve Belt")
2.
Remove the idler (A).
Tightening torque :
42.2 ~ 53.9 N.m (4.3 ~ 5.5 kgf.m, 31.1 ~ ...
© 2017-2026 www.kceed.com
