Kia Cee'd: SRSCM / Side Impact Sensor (SIS) Components and components location

Side Impact Sensor (SIS) Description and operation

Description The Side Impact Sensor (SIS) system consists of two front SIS which are installed inside the Center Pillar (LH and RH). They are remote sensors that detect acceleration ...

Side Impact Sensor (SIS) Repair procedures

Removal Side Impact Sensor 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. ...

Other information:

Kia Cee'd JD Service Manual: Repair procedures
Inspection 1. After disconnecting the vapor hose from the PCV valve, remove the PCV valve. 2. Reconnect the PCV valve to the vapor hose. 3. Run the engine at idle, then put a finger over the open end ...

: Emergency Towing
Hybrid Electric Vehicle (HEV)/Plug-In Hybrid Electric Vehicle (PHEV) If your vehicle becomes inoperable without access to wheel dollies or a vehicle transport trailer, it can be flat-towed with all wheels on the ground, regardless of the powertrain and transmission configuration, under the fol ...