Kia Cee'd: SRSCM / Side Impact Sensor (SIS) Description and operation

The Side Impact Sensor (SIS) system consists of two front SIS which are installed inside the Center Pillar (LH and RH). They are remote sensors that detect acceleration due to collision at their mounting locations. The primary purpose of the Side Impact Sensor (SIS) is to provide an indication of a collision. The Side Impact Sensor (SIS) sends acceleration data to the SRSCM.

Front Impact Sensor (FIS) Repair procedures

Removal    • Removal of the airbag must be performed according to the precautions/ ...

Side Impact Sensor (SIS) Components and components location

Components ...

Other information:

Kia Cee'd JD Service Manual: Rear Door Latch Components and components location
Component Location   1. Rear door latch ...

Kia Cee'd JD Service Manual: Troubleshooting
Troubleshooting Ignition System   Symptom Suspect Area Remedy Engine will not start or is hard to start (Cranks OK) Ignition lock switch Inspect ignition lock switch, or replace as requ ...