Kia Cee'd: Body Electrical System / Power Door Locks

Instrument Cluster Repair procedures

Inspection Speedometer 1. Adjust the pressure of the tires to the specified level. 2. Drive the vehicle onto a speedometer tester. U ...

Components and components location

Component Location   1. Door lock switch 2. SJB (Smart Junction Box) 3. BCM (Body Control Module) 4. Front door lock actuator 5. Rear door lock a ...

Other information:

Kia Cee'd JD Service Manual: Drive Belt Repair procedures
Removal 1. Disconnect the battery negative terminal. 2. Loosen the alternator tension adjusting bolt (A) to loosen tension. 3. Remove the drive belt (A). Inspection ...

Kia Cee'd JD Service Manual: Rain Sensor Repair procedures
Inspection Rain Sensing Wiper 1. In IGN2 ON state, if auto switch input (LIN communication) is ON then both wiper low relay and wiper high relay outputs are controlled by the rain sensor input signal. 2. If the wiper switc ...