Kia Cee'd: Mirror / Outside Rear View Mirror Repair procedures

Kia Cee'd JD Service Manual / Body (Interior and Exterior) / Mirror / Outside Rear View Mirror Repair procedures

Replacement
  
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Put on gloves to protect your hands.
1.
Using a screwdriver or remover, remove the front door quadrant inner cover (A).

2.
Disconnect the outside rear view mirror connector (B).
3.
After loosening the mounting bolts, then remove the outside rear view mirror (A).
Tightening torque :
6.9 ~ 10.8 N.m(0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

4.
Install in the reverse order of removal.
  
•
Make sure the connector is connected properly.
Outside Rear View Mirror Components and components location
Component Location   1. Outside rear view mirror ...

Inside Rear View Mirror Components and components location
Component Location   1. Inside rear view mirror ...

Other information:

Kia Cee'd JD Service Manual: Schematic diagrams
Circuit Diagram Input/Output Specification Connector Pin Lay Out IMS input/output pin information   No Signal Name I/O Contents Remark A1 - ...

Kia Cee'd JD Service Manual: Knock Sensor (KS) Description and operation
Description Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. When knocking occurs, the vibration from the cylinder block is applied as pre ...

© 2017-2026 www.kceed.com