Kia Cee'd: Manual Transaxle System / Back-up Lamp Switch Specifications

 

Manual Transaxle Repair procedures

Removal 1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 2. Remove the battery ...

Back-up Lamp Switch Description and operation

Description • Detects the shift operation to the reverse gear. • When the transaxle is in the reverse condition, the reverse shift r ...

Other information:

Kia Cee'd JD Owners Manual: Multi fuse
If the multi fuse is blown, it must be removed as follows: 1. Turn off the engine. 2. Disconnect the negative battery cable. 3. Remove the fuse panel on the right side in the engine compartment. 4. Remove the nuts shown in the picture above. 5. Replace the fuse with a new one of the s ...

Kia Cee'd JD Service Manual: ISG (Idle Stop & Go) Schematic diagrams
Schematic Diagram   1. C-CAN High/Low 2. MIL. Lamp 3. Immobilizer 4. Canister 5. Manifold Absolute Pressure Sensor (MAPS) 6. Intake Air Temperature Sensor (IATS) 7. Engine Coolant Temperature Sensor (ECTS) 8. Throttle Position Sensor (T ...