Kia Cee'd: Engine start/stop button position / ON
With manual transaxle
Press the engine start/stop button when the button is in the ACC position without depressing the clutch pedal.
With automatic transaxle/DCT
Press the engine start/stop button while it is in the ACC position without depressing the brake pedal.
The warning lights can be checked before the engine is started. Do not leave the engine start/stop button in the ON position for a long time. The battery may discharge, because the engine is not running.
ACC(Accessory)
With manual transaxle
Press the engine start/stop button when
the button is in the OFF position without
depressing the clutch pedal.
With automatic transaxle/DCT
Press the engine start/stop b ...
START/RUN
With manual transaxle
To start the engine, depress the clutch
pedal and brake pedal, then press the
engine start/stop button with the shift
lever in the N (Neutral) position.
With automatic ...
Other information:
Kia Cee'd JD Service Manual: Condenser Repair procedures
Inspection
1.
Check the condenser fins for clogging and damage. If clogged, clean
them with water, and blow them with compressed air. If bent, gently
bend them using a screwdriver or pliers.
2.
Check the condenser connections ...
Kia Cee'd JD Service Manual: IMS Control Switch Repair procedures
Inspection
1.
Remove the IMS control switch connector (A).
2.
With the IMS control switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the I ...
