Kia Cee'd: Engine start/stop button position / ACC(Accessory)
With manual transaxle
Press the engine start/stop button when the button is in the OFF position without depressing the clutch pedal.
With automatic transaxle/DCT
Press the engine start/stop button while it is in the OFF position without depressing the brake pedal.
The steering wheel unlocks (if equipped with anti-theft steering column lock) and electrical accessories are operational.
If the engine start/stop button is in the ACC position for more than 1 hour, the button is turned off automatically to prevent battery discharge.
OFF
With manual transaxle
To turn off the engine (START/RUN position)
or vehicle power (ON position), stop
the vehicle then press the engine
start/stop button.
With automatic transaxle/DCT*
To ...
ON
With manual transaxle
Press the engine start/stop button when
the button is in the ACC position without
depressing the clutch pedal.
With automatic transaxle/DCT
Press the engine start/stop b ...
Other information:
Kia Cee'd JD Owners Manual: To set cruise control speed
1. Move the lever down () on the
steering wheel, to turn the system on.
The cruise indicator light will illuminate.
2. Accelerate to the desired speed, which
must be more than 30 km/h (20 mph).
✽ NOTICE - Manual transaxle
For manual transaxle vehicles, you
should depress the brake ped ...
Kia Cee'd JD Service Manual: Manifold Absolute Pressure Sensor (MAPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the MAPS at idle and IG ON.
Specification: Refer to "Specification"
...
