Kia Cee'd: Blind Spot Detection system / Blind Spot Detection Switch Components and components location

Blind Spot Detection Unit" Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the rear bumper cover. (Refer to Body - "Rear Bumper Co ...

Blind Spot Detection Switch Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad ...

Other information:

Kia Cee'd JD Owners Manual: Electronic Stability Control (ESC) indicator
The ESC indicator will illuminate when the ignition switch is turned ON, but should go off after approximately 3 seconds. When the ESC is on, it monitors the driving conditions. Under normal driving conditions, the ESC indicator will remain off. When a slippery or low traction condit ...

Kia Cee'd JD Service Manual: Neutral Switch Specifications
Specifications   Item Specified Type ON/OFF Operation condition Neutral position Operation voltage 10V ~ 15V Operation temperatures -30 ...