This light illuminates if the ignition switch is turned ON and goes off in approximately 3 seconds if the system is operating normally.
If the ABS warning light remains on, comes on while driving, or does not come on when the ignition switch is turned to the ON position, this indicates that there may be a problem with the ABS.
If this occurs, we recommend that the system be checked by an authorized Kia dealer. The normal braking system will still be operational, but without the assistance of the anti-lock brake system.
Electronic brake force distribution (EBD) system warning light
If two warning lights illuminate at the same time while driving, your vehicle’s ABS and EBD system may have malfunctioned.
In this case, your ABS and regular brake system may not work normally. We recommend that the system be checked by an authorized Kia dealer.
✽ NOTICE
If the ABS warning light or EBD warning light is on and stays on, the speedometer or odometer/tripmeter may not work. Also, the EPS warning light may illuminate and the steering effort may increase or decrease. In this case, we recommend that the system be checked by an authorized Kia dealer.
WARNING
If both ABS and Brake warning lights are on and stay on, your vehicle’s brake system will not work normally. So you may experience an unexpected and dangerous situation during sudden braking. In this case, avoid high speed driving and abrupt braking except an emergency situation.
We recommend that the system be checked by an authorized Kia dealer.
Kia Cee'd JD Owners Manual: Pairing through [PHONE]
Setup
Press the key Select
[Phone] Select [Pair Phone]
The following steps are the same as
those described in the section "When
No Devices have been Paired" on the
previous page.
✽ NOTICE
The waiting period during phone
pairing will last for one minute.
The pairing process will fai ...
Kia Cee'd JD Service Manual: Heater Core Repair procedures
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater & blower assembly.
(Refer to Heater - "Heater Unit")
3.
Remove the heater core cover (A) after loos ...