Kia Cee'd: Rear Wiper/Washer / Rear Washer Switch Repair procedures

Kia Cee'd JD Service Manual / Body Electrical System / Rear Wiper/Washer / Rear Washer Switch Repair procedures

Inspection
Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch.

Rear Wiper Switch

Rear Washer Switch

Rear Wiper Motor Repair procedures
Inspection Rear Wiper Motor 1. Remove the 4P connector from the rear wiper motor. 2. Connect battery positive (+) and negative (-) c ...

Rear Washer Motor Repair procedures
Inspection Front and Rear Washer Motor 1. With the washer motor connected to the reservoir tank, fill the reservoir tank with water. ...

Other information:

Kia Cee'd JD Owners Manual: Checking the tire inflation pressure
1. After driving approximately 7~10 km (4~6 miles or about 10 min), stop at a safety location. 2. Connect the filling hose (2) of the compressor directly to the tire valve. 3. Plug the compressor power cord into the vehicle power outlet. 4. Adjust the tire inflation pressure to the ...

Kia Cee'd JD Service Manual: Input Speed Sensor 1 Description and operation
Description The input shaft speed sensor is important in that it detects the input shaft RPM and sends this information to the Transmission Control Module (TCM). It provides important input information for electric control. The information is needed in all operations, i ...

© 2017-2020 www.kceed.com