Kia Cee'd: Rear Wiper/Washer / Rear Washer Motor Repair procedures

Kia Cee'd JD Service Manual / Body Electrical System / Rear Wiper/Washer / Rear Washer Motor Repair procedures

Inspection

Front and Rear Washer Motor

With the washer motor connected to the reservoir tank, fill the reservoir tank with water.

Before filling the reservoir tank with water, check the filter for foreign material or contamination. if necessary, clean the filter.

2.	Connect positive (+) battery cables to terminal 1 and negative (-) battery cables to terminal 2 respectively.

3.	Check that the motor operates normally and the washer motor runs and water sprays from the front nozzles.

If they are abnormal, replace the washer motor.

[Front & Rear washer]

No.	Description
1	Windshield washer (+)
2	Ground
3	Rear washer (+)

Rear Washer Switch Repair procedures

Inspection Check for continuity between the terminals while operating the wiper and washer switch. If it is not normal condition, replace wiper and wiper switch. Rear W ...

Electro chromic Inside Rear View Mirror

...

Other information:

Kia Cee'd JD Service Manual: Side Impact Sensor (SIS) Description and operation
Description The Side Impact Sensor (SIS) system consists of two front SIS which are installed inside the Center Pillar (LH and RH). They are remote sensors that detect acceleration due to collision at their mounting locations. The primary purpose of the Side Impact Sensor (S ...

Kia Cee'd JD Service Manual: Inhibitor Switch Description and operation
Description The inhibitor switch is mounted on the transmission case. It includes the electric switch plate circuit and is directly connected with the transmission lever via transmission cable. When the driver shifts the transmission lever, the contact point on the switch ...