Kia Cee'd: SRSCM / PAB ON/OFF Switch Description and operation

Driver can control the passenger airbag operating Condition (Enable or Disable) by using this PAB ON/OFF switch.

Passenger Airbag (PAB) ON/OFF Switch is installed in the crash pad side cover.

Side Impact Sensor (SIS) Repair procedures

Removal Side Impact Sensor 1. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 2. ...

PAB ON/OFF Switch Components and components location

Components ...

Other information:

Kia Cee'd JD Service Manual: Crankshaft Position Sensor (CKPS) Repair procedures
Inspection 1. Check signal waveform of CKPS and CMPS using a GDS. Specification: Refer to “Waveform” Removal 1. Turn the ignition switch OFF and disconnect the battery negative ...

Kia Cee'd JD Owners Manual: Mounting bracket for roof carrier
To install or remove a roof carrier, you can use the mounting bracket and cover on the roof. When you install a roof carrier, use the following procedure. 1. Insert a slim tool(coin or flat blade driver) into the slot and slide the cover toward the arrow on the cover. WARNING Use a c ...