Kia Cee'd: SRSCM / PAB ON/OFF Switch Components and components location
| Components |
PAB ON/OFF Switch Description and operation
Description
Driver can control the passenger airbag operating Condition (Enable or Disable)
by using this PAB ON/OFF switch.
Passenger Airbag (PAB) ON/OFF Switch is installed i ...
PAB ON/OFF Switch Repair procedures
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least three minutes
bef ...
Other information:
: Blind Spot Information System Requirements. Switching Blind Spot Information System On and Off
Blind Spot Information System Requirements
Blind spot information system turns on
when all the following occur:
You start your vehicle.
You shift into drive (D).
The vehicle speed is greater than
6 mph (10 km/h).
Switching Blind Spot Information System On and Off
To switch blind spot informa ...
Kia Cee'd JD Service Manual: Outside Rear View Mirror Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with protective
tape, and apply protective tape around the related parts, to
prevent damage.
...
