Kia Cee'd: Lighting System / High Mounted stop lamp Repair procedures

Kia Cee'd JD Service Manual / Body Electrical System / Lighting System / High Mounted stop lamp Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the rear spoiler assembly (A). (Refer to Body - "Rear Spoiler")

3.	Remove the high mounted stop lamp (A) after removing the mounting screws.

Installation

1.	Install the high mounted stop lamp.

2.	Install the rear spoiler.

3.	Connect the negative (-) battery terminal.

Rear Fog Lamps Repair procedures

Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the lighting switch of the multifunction switch. (Refer t ...

Rear Combination Lamp Repair procedures

Removal [5Door] Rear Combination lamp (Inside) 1. Disconnect the negative (-) battery terminal. 2. Remove the rear comb ...

Other information:

Kia Cee'd JD Service Manual: Intake Air Temperature Sensor (IATS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within ...

Kia Cee'd JD Owners Manual: Operating conditions
To operate: Press the BSD switch with the Ignition switch in the ON position. The indicator on the BSD switch will illuminate. When the vehicle speed exceeds 30 km/h (20 mph), the system will be activated. To cancel: Press the BSD switch again. The indicator on the switch will go off. W ...